Software Distributor defects fixed in HP-UX 11i v1, v2 and v3

Table 17 HP-UX 11i v2 March 2004 Fixes (continued)

If a system makes use of RPC_SUPPORTED_NETADDRS, they would be

unset by S120swconfig, and later startup scripts (eg ovstart) would cause

errors.

JAGae99511

Swverify incorrectly shows a missing .o file in a depot created using the

package_in_place features of swpackage. The .o is actually not missing, and

swinstall for swcopy from the package_in_place work correctly. This can be

reproduced by using "swpackage -x package_in_place=true -s source_depot

-d target_depot patch", then running swverify on target_depot. The patch

copied by swpackage must contain a .o file with the archive_path attribute

set to the target path of an archive library that the .o file will go into.

JAGaf02256

Driver Versions

The driver versions for each release of the FibrChanl-01 (fcd) driver:

Table 18 FibrChanl-01 (fcd) Driver Version History

RevisionRelease

B.11.23.0903March 2009

B.11.23.0811November 2008

B.11.23.0809September 2008

B.11.23.0807July 2008

B.11.23.0803March 2008

B.11.23.08.02December 2007

B.11.23.08.01September 2007

B.11.23.08April 2007

B.11.23.07December 2006

B.11.23.06September 2006

B.11.23.05 (64-bit)June 2006

B.11.23.04.01 (64-bit)December 2005

B.11.23.03 (64-bit)March 2005

B.11.23.02 (64-bit)September 2004

Known Problems and Limitations

This section provides a list of known problems and limitations as known to HP at time of

publication. If workarounds are available, they are included.

• EFI SEARCH Causes Boot to Fail on rx7640, rx8640, and sx2000 Superdome Server Systems

Running the SEARCH command at the EFI shell on rx7640, rx8640, and HP Integrity

Superdome/SX2000 server systems can cause the system to fail to boot through a Fibre

Channel HBA. rx7640 systems have a built-in SEARCH of slot 7. Affected 2Gb Fibre Channel

HBAs are: A6826A, A9782A, A9784A, and AB465A with EFI driver version 1.47 or earlier.

Affected 4Gb Fibre Channel HBAs are: AB378A and AB379A with EFI driver version 1.01.

The boot will fail with a message similar to the following:

Load of HP-UX

Primary Boot: 1.0.1/1/0/4/0.8.0.255.0.6.0 failed: Not Found