Software Distributor Administrator Guide (September 2010)

preview job progress from the Job Browser. See “Step VII: Monitor Results ”
(page 168) for more information.)
5. (Optional) Scheduling a Job
a. Select the Schedule button. This activates the fields that let you specify the
time and date you at which you want your job to run. (For example, you may
want to schedule a job at midnight when few users are logged in.)
b. After you specify the schedule information, click OK. The system displays a
note indicating that the job has been scheduled.
c. Click OK in the dialog. The Target Selection Window reappears. Select
File→Exit to return to the Job Browser, from which you can monitor your
scheduled job.
Step VI: Analysis and Installation
SD-UX analyzes the target before performing the actual install, copy, or remove
operation. (If you set up a preview job in Step IV, the install stops after the analysis.)
Figure 7-8 Install Analysis Dialog
1. When the Analysis is complete, the status for the target you selected should show
Ready, indicating no errors or warnings occurred during analysis. Select OK to
proceed with the installation.
The Install Window dialog (Figure 7-9: “Install Window dialog”,) appears, and
the installation starts automatically. When the status in the dialog changes to
Completed, the installation has successfully completed.
7.4 Remote Operations Tutorial 167