Software Distributor Administrator Guide (September 2010)

For example, to install the C and Pascal products from depot sw_server to three
remote hosts with a job title of 02-HLLs:
# swinstall -s sw_server -x job_title=02-HLLs cc pascal \
@ hostA hostB hostC
6.4.3 Removing Job Information
Purpose: to increase performance and free up disk space when you run very large
numbers of jobs.
SD-UX stores small amounts of information (such as job status or controller or agent
logfiles) about each job. You can display this information from the Job Browser or with
swjob. Keeping very large numbers of job information files may affect performance
and reduce the usability of the Job Browser.
Running swconfig, swcopy, swinstall, swremove, or swverify with the
autoremove_job command option set to true prevents SD-UX from storing the job
information. (The trade-off is that you can not view the job information except by
viewing log files.)
swinstall -s sw_server -x autoremove_job=true \
MySoftware @ hostA hostB hostC
You can also use the -u option to remove all old job information:
swjob -u \*
You can also remove individual jobs from the Job Browser (see “Removing a Job”
(page 147).)
6.4 Managing and Tuning Jobs with Command Options 151