Installing SoftBench

Using SoftBench on X Terminals and PC X Servers
Appendix D 83
D Using SoftBench on X Terminals
and PC X Servers
SoftBench requires a number of special fonts to support all its functions.
When you run SoftBench on an HP-UX workstation, your X server finds
the necessary fonts under the /opt/softbench/fonts directory.
However, if you use an X terminal or PC-based X server software, your
display will not find the necessary fonts. SoftBench issues font errors and
warnings to notify you of the problem. You can use SoftBench in this
state, but some text will not display properly. To achieve the optimal
behavior in SoftBench, you must configure your X terminal or PC X
server so it can find the fonts.
The steps required are different for each type of X display. These
instructions cover only X terminals and the Reflection® X, Exceed® and
PC-Xware® PC X servers.
There are three approaches:
Configure a font server. The X window system supports a concept
called "font servers" that allows X displays to retrieve fonts from a
remote system instead of from a local directory. If you set up a font
server and configure it to export the fonts found under
/opt/softbench/fonts, then all X displays can access the SoftBench
fonts through the server. See fs(1M) for details.
This approach works for all types of X displays. It can be the
least-effort solution, especially if you already use a font server. The
only configuration needed on the X displays is to specify the location
of the font server.
Access the font files across the network as if they were installed
locally. Most X terminals support remote file access like this. On a PC,
you must create a network drive and configure the X server to look for
its fonts in the remote directory. This approach works with X
terminals and with Reflection X. Exceed and PC-Xware cannot access
the Unix-format X fonts directly from an HP-UX system.
Install customized font files onto the PC. This requires the most
configuration effort on each PC, but it may have better performance.