Installing SoftBench

Setting Up Network-Distributed Operation
Displaying a Remote SoftBench Session Locally
Chapter 646
Displaying a Remote SoftBench Session
Locally
This section describes the requirements to run SoftBench on a remote
system and display it on your local system:
• Remote SoftBench is supported with the following local window
managers:
— VUE window manager (HP-UX 10.20 only)
— CDE window manager
• The system where SoftBench is running needs access to the display
server. See xhost(1) for more information.
• SoftBench fonts must be available on both the system where
SoftBench is running and the system where SoftBench is displayed.
They can be either installed locally or from a font server. For more
information, see Appendix D, “Using SoftBench on X Terminals and
PC X Servers,” on page 83.
• If you want to use SoftBench on a supported X-terminal, SoftBench
needs to be installed and run on the X-terminal server system. For
more information, see Appendix D, “Using SoftBench on X Terminals
and PC X Servers,” on page 83.
• You can also display SoftBench on a PC system, using PC X server
software such as Exceed®. For more information, refer to Appendix D,
“Using SoftBench on X Terminals and PC X Servers,” on page 83.
See the section "Running SoftBench on a Remote System" in the "Using
SoftBench" chapter of the SoftBench User's Guide for instructions to run
SoftBench on a remote system and display it on a local system.