P-UX SNAplus2 Installation Guide (June 2003)

The terminfo Database
Altering the terminfo Database
Chapter 454
70094A=hpSNAplus:UR=\At:UL=\Ar:BL=\Af:BR=\Ag:HB=\A,:LT=\A5:RT=
\A6:SB=\A):EL=\D\I:VB=\A.
70094A=hpSNAplus:UR=\At:UL=\Ar:BL=\Af:BR=\Ag:HB=\A,:LT=\A5:RT=
\A6:SB=\A):EL=\D\I:VB=\A.
These terminfo entries may not always have line-drawing characters.
Use the defaults.
• hp=hpSNAplus:
• hpex=hpSNAplus:
• hpterm=hpSNAplus:
• X-hpterm=hpSNAplus:
• 300h=hpSNAplus:
• hp300h=hpSNAplus:
vt100 terminals with line-drawing character set loaded into GO:
vt100=:UR=\Ak:UL=\A1:BR=\Aj:BL=\Am:HB=\Aq:LT=\At:RT=\Au:SB=\Aa
:EL=\I:VB=\Ax
vt100-am=:UR=\Ak:UL=\A1:BR=\Aj:BL=\Am:HB=\Aq:LT=\At:RT=\Au:SB=
\Aa:EL=\I:VB=\Ax
Unsupported Term Types
The following terminfo files are included in the SNAP2-CORE file set
but are unsupported. Note that the following terminfo files will be
generated by the tic command (see the HP-UX Reference for more
information on the tic command).
• /usr/share/lib/terminfo/h/hpsna
• /usr/share/lib/terminfo/h/hpsnaplus
• /usr/share/lib/terminfo/h/hpSNAplus
• /usr/share/lib/terminfo/h/hp2392sna
• /usr/share/lib/terminfo/2/2392sna
These terminfo entries specify the same terminfo file. They are best
used with the SNAplus2 ASCII interface on Term0 defined terminals
(which include most HP terminals). If an HP terminal has programmable
softkeys, it is likely to meet the Term0 definition.