P-UX SNAplus2 Installation Guide (June 2003)

Verifying the SAM SNAplus2 Installation Process
Verifying your Installation
Chapter 3 45
When this variable is set to 1, the startup script will stop the
Internet Services daemon, start the snapinetd process, then restart
the Internet Services daemon. This variable should only be set to 1
on systems that have SNAplus2-Link installed and have TN3270
Server configured to use port 23. The default value is 0.
/sbin/rc2.d/S680snaplus2 is a soft link to /sbin/init.d/snaplus2.
HP-UX uses this link for executing the SNAplus2 startup script with
the start option. /sbin/rc1.d/K320snaplus2 is a similar soft link for
starting the SNAplus2 startup script with the stop option.
Step 3. Check the /etc/opt/sna/sna.ini file using any text editor to see if the
following entries are present:
• SLIM BSD broadcast netmask (for back-level support)
• DOWNLOAD /dev/psi(0/1)_ index path= hw_path (for SDLC)