HP-UX SNAplus2 Upgrade Guide (June 2003)
Changes in SNAplus2 Functions in R6.0 and later releases
NetView Commands and UNIX Command Facility
Chapter 4 55
NetView Commands and UNIX Command
Facility
NetView Commands in SNAplus have been replaced by the Remote
Command Facility (RCF). RCF consists of the Service Point Command
Facility (SPCF), which enables the NetView operator to manage
SNAplus2 components, and the UNIX Command Facility (UCF), which
enables the NetView operator to issue HP-UX commands on the
SNAplus2 computer.
The overall syntax of commands issued at the NetView console is the
same as in Release 4, but the detailed syntax of individual commands
has been changed. The changes for each group of commands are as
follows:
Network Access Commands
These commands are no longer supported. You do not
need to identify the name of the Netview operator
before issuing other commands, so the login-sp
command is no longer required. The function of the
display-applicats (Display Applications) command,
which lists the service components running on the
SNAplus system, can be provided by using SPCF to
issue query_* administration commands from the
Netview console; see “Node commands,” next, for more
information.
Node Commands
Node commands in SNAplus have been replaced by
SPCF commands. These provide the same functions as
the Release 4 node commands, but use the syntax of
SNAplus2 administration commands (as they would be
specified to the snapadmin program).
UNIX Command Facility (UCF)
The syntax of UCF commands is the same as in
Release 4. However, note the following changes to the
way UCF is used:
• The login-sp command is no longer required
before issuing UCF commands.