HP-UX SNAplus2 Upgrade Guide (June 2003)

Upgrading from Earlier Versions of SNAplus2 to R6.0 and later
Upgrading a Windows Client
Chapter 2 31
Upgrading a Windows Client
The upgrade process for Windows clients requires that a current-level
server is available and started.
To upgrade the client, use the following procedure:
Step 1. Stop SNAplus2 applications running on the client.
Step 2. Check that the NAP (Network Access Process) is not running on the
client.
Step 3. Reinstall the SNAplus2 client software by running the installation
program that is provided with the client.