HP-UX SNAplus2 Release Notes Version R7.11.31.200 (5900-1749, August 2011)

Optional
Running xsnapadmin, the configuration and management GUI, requires the following:
• Motif interface software
• Bit-mapped display to run X11
SNAplus2 APPN End Node
The SNAplus2 APPN End Node requires the same hardware and software as the SNAplus2 Link.
HP SNAplus2 APPN Enterprise Extender and NN
The HP SNAplus2 APPN Enterprise Extender and NN requires the same hardware and software
as the HP SNAplus2EE Link.
Installation requirements
After you determine that you have the hardware and software required for the SNAplus2 products
you are installing, you can begin loading the product files. Be sure to have a CD-ROM drive
attached to your system to read the product media. This drive should be configured on your system
with an entry in the /dev directory.
To load the product files into the appropriate directories on your system, use the /usr/sbin/swinstall
program. For specific instructions on using swinstall, refer to the HP Software Distribution Utilities
(SD) User’s Guide.
To add the SNAplus2 Environment and Link components, run the SAM SNAplus2 Installation
Program on the SAM “Networking and Communications” screen.
Defect fixes in this version
Table 1 Defects fixed in this version of SNAplus2
ProblemIdentifer
HP-UX SNAplus2 R7.11.31 LAN interface does not recover when the LAN cable is disconnected at
the remote end.
QXCR1001103437
When HP-UX SNAplus2 R7.11.11 communicates with the Enterprise Extender (EE) link, the system
may go down and the following message will be displayed:
QXCR1000929068
Assert in ../../p/sappn/ndsmain.c
The /opt/sna/w32cli/readme file refers to IBM CS Linux client instead of the SNAplus2 client.QXCR1000833786
In HP-UX SNAplus2 R7.11.31.100, the help feature on the xsnapadmin tool does not open on IA
machines.
QXCR1000840300
HP-UX SNAplus2 R7.11.31 panics when a sna_sdlc_vsi_stream_read operation occurs.QXCR1000900400
The sna_ndg_vdl_stream_read_service module hangs when XID is received in interrupt
context.
QXCR1000811972
In HP-UX SNAplus2 R7.11.31, time stamps on kernel logs do not wrap after 497 days.QXCR1001107882
Software availability in native languages
This version of SNAplus2 is available only in English.
6 HP-UX SNAplus2 R7.11.31.200 Release Notes