HP-UX SNAplus2 Release Notes HP-UX 11i v1 Manufacturing Part Number : J6380-90009 E0607 U.S.A. © Copyright 2007 Hewlett-Packard Development Company, L.P.
Legal Notices Copyright 2007 Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license required from HP for possession, use or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor’s standard commercial license. The information contained herein is subject to change without notice.
1 HP-UX SNAplus2 R7.11.11.
HP-UX SNAplus2 R7.11.11.200 Release Notes Announcement Announcement This version of SNAplus2 (R7.11.11.200) is supported on machines running HP-UX 11i v1 operating systems.
HP-UX SNAplus2 R7.11.11.200 Release Notes What’s in This Version What’s in This Version This version of SNAplus2 (R7.11.11.200), referred to in this document as SNAplus2 R7 is supported on the HP-UX 11iv1 operating system.
HP-UX SNAplus2 R7.11.11.200 Release Notes What’s in This Version ASUITE is a set of APPC applications. Use ASUITE to perform functions such as file transfer and others. — Full Duplex APPC Full Duplex APPC is an addition to the existing APPC interface that allows transaction programs (TP) to send and receive data at the same time. — Session Level interface (SLI) SLI is an extension of an LUA interface, working at a higher level.
HP-UX SNAplus2 R7.11.11.
HP-UX SNAplus2 R7.11.11.200 Release Notes Known Problems and Workarounds Known Problems and Workarounds Following are the known problems in this release of SNAplus2: • To use SNAplus2 on HP-UX 11i to control a large number of resources (hundreds of sessions or conversations), HP recommends that you install the following O/S patch: PHKL_23445. This patch is available to download at http://www.itrc.hp.com. • SNAplus2 Release 5.x and SNAplus2 Release 7.
HP-UX SNAplus2 R7.11.11.200 Release Notes Compatibility Information and Installation Requirements Compatibility Information and Installation Requirements The following section lists the hardware and software requirements for the HP SNAplus2EE Link product. For the hardware and software requirements for SNAplus2 User Applications, refer to the HP-UX SNAplus2 Installation Guide, available at: http://www.docs.hp.com/en/netcom.
HP-UX SNAplus2 R7.11.11.200 Release Notes Compatibility Information and Installation Requirements Running HP SNAplus2EE Link in a client/server environment requires additional LAN/9000 Link software components for servers and workstations. Running HP SNAplus2EE Link using QLLC requires X.25 (J2793A) software. Running HP SNAplus2EE Link using Token Ring, 802.3/Ethernet, or FDDI requires software for each link type.
HP-UX SNAplus2 R7.11.11.200 Release Notes Fixes in This Version Fixes in This Version This section describes the patches, software and document fixes included in this version of SNAplus2. Software Fixes If you are upgrading from an earlier version of SNAplus2 to R7.11.11.200, here is a list of known critical and serious problems from the earlier versions that have been fixed and included in this release.
HP-UX SNAplus2 R7.11.11.200 Release Notes Fixes in This Version Table 1-1 Software Fixes (Continued) SR Number Problem 8606242140 SNAplus2 API intermittent thread hang with Encina PPC gateway. 8606195995 Data page panic in wait_for_lock. 8606202100 SNA Process hang. 8606208520 Data Page Faults: libsixs.a nms_nah_process_mu_rsp+0x100: reg19 bad. 8606218168 System crash in SNAPLUS2 code at nrm_bld_and_send_deact_sess+0x.
HP-UX SNAplus2 R7.11.11.200 Release Notes Fixes in This Version Table 1-1 SR Number Software Fixes (Continued) Problem 8606199884 swverify errors on /usr/share/man/man1.Z/sna.1 with SNAplus2-Common. 1653301333 R6.1020 Invalid header created in trace files prevents formatting. 1653301382 R6.1020 snapcfgdae dies when launching xsnapadmin. 1653305284 R6 11.00 SNAplus2 SAM fails to build kernel after installing PHCO_17631. 1653305805 R6: snapdaemon hangs in v0_get_rw_lock while shutting down.
HP-UX SNAplus2 R7.11.11.200 Release Notes Fixes in This Version Table 1-1 SR Number Software Fixes (Continued) Problem 5003469213 R5.1 SNAplus2 3270 printer hangs with send/rec RU 0 bytes in BIND. 8606101513 R6:CMRCV should return status CM_SECURITY_NOT_VALID. 8606102608 R6.11: str_info flags field does not have MGR_IS_MP flag set in router. 8606102678 R6 snap3270 printer tail +2|lp -dxxxx does not print to spooler. 8606104367 SNAplus+2 R6.11.00 Panic in svphpoll+0x44 using EISA ACC sdlc.
HP-UX SNAplus2 R7.11.11.200 Release Notes Fixes in This Version Table 1-1 SR Number Software Fixes (Continued) Problem 8606127677 SNAplus2 R6.11.00 - sdlc & link port remain in stopping state. 8606128040 R6.11.64 bit system panic in nba_mm_free/nlu_remove_mode. 8606128605 3270 LUs show inactive on HP system, while IBM system shows them as active. 8606134781 SAM/ SNA: Cannot find tunable parameter - num_boards_3525. 8606135068 SNAplus2 R6.11.00 reboot required to activate sdlc LS once deactivated.
HP-UX SNAplus2 R7.11.11.200 Release Notes Fixes in This Version Table 1-1 Software Fixes (Continued) SR Number Problem 8606312213 Remove algorithm for locating free UID/GID for sna. 8606389457 R6.2 SNA+2 products may fail to swinstall. Documentation Fixes The following changes have been made to the documentation and will become effective with this release. Table 1-2 SR Number Documentation Fixes Problem 1653245936 SNAplus2 Internal Trace not clear. (Corrected in Diagnostics Guide).
HP-UX SNAplus2 R7.11.11.200 Release Notes Software Availability in Native Languages Software Availability in Native Languages This version of SNAplus2 is available only in English.
