HP-UX SNAplus2 Release Notes (June 2005)

HP-UX SNAplus2 R6.11.23.003 Release Notes
Compatibility Information and Installation Requirements
Chapter 112
Compatibility Information and Installation
Requirements
The following sections list the hardware and software requirements for
the SNAplus2 Link product. For the hardware and software
requirements for SNAplus2 User Applications, see the HP-UX SNAplus2
Installation Guide, available at:
http://docs.hp.com/en/netcom.html#SNAplus2
Hardware Requirements
SNAplus2 Link requires the following hardware:
• 18.9 MB of disk space
• A physical link to the SNA remote system, such as a pair of
compatible modems, a modem eliminator, or a LAN connection.
• A 2-port PCI PSI card (J3525A) and available slot if using PCI
SDLC.
Note that PCI SDLC is supported only on the following servers and
workstations:
— HP 9000 servers rp8400, rp7410, rp2400, rp5400, rp34x0,
rp4440, rp7400, HP 9000 Superdome, and HP Integrity Servers
rx2600, rx4640, IPF Superdome, rx56XX, and rx8620 servers
Running SNAplus2 Link in a client/server environment requires
additional LAN/9000 Link hardware components for servers or
workstations, including the LAN interface card.
Running SNAplus2 Link using QLLC requires X.25 (J3525A) hardware.
Running SNAplus2 Link using Token Ring (A5783A), 802.3/Ethernet, or
FDDI (A3739B) requires hardware for each link type.
Software Requirements
This version of SNAplus2 Link requires the HP-UX 11i v2 operating
system.