HP-UX SNAplus2 R6.11.23.003 Release Notes HP-UX 11i v2 Manufacturing Part Number: J2745-90017 June 2005 United States © Copyright 2005 Hewlett-Packard Development Company L.P. All rights reserved.
Legal Notices The information in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material.
OpenGL is a registered trademark of Silicon Graphics, Inc. UNIX is a registered trademark in the United States and other countries, licensed exclusively through The Open Group.
1 HP-UX SNAplus2 R6.11.23.003 Release Notes The information in this document applies to the release of HP-UX SNAplus2, version R6.11.23.003, for HP-UX 11i v2.
HP-UX SNAplus2 R6.11.23.003 Release Notes Announcement Announcement This version of SNAplus2 (R6.11.23.003) is supported on machines running HP-UX 11i v2 operating system. SNAplus2 R6 Discontinuance HP will release SNAplus2 version R7, a new version of SNAplus2, via the September 2005 Application Release Media. The SNAplus2 R6 products will be discontinued and will no longer be available for purchase when the new SNAplus2 version R7 becomes available on the September 2005 Application Release Media.
HP-UX SNAplus2 R6.11.23.
HP-UX SNAplus2 R6.11.23.003 Release Notes What Is in R6.11.23.003 What Is in R6.11.23.003 This version of SNAplus2 is R6.11.23.003 and is referred to in this document as SNAplus2 R6.3. This document provides the updated list of hardware to include additional supported servers.
HP-UX SNAplus2 R6.11.23.003 Release Notes What Is in R6.11.23.
HP-UX SNAplus2 R6.11.23.003 Release Notes What Is in R6.11.23.003 # # # # # IP_ADDRESS[5]=192.168.0.1 SUBNET_MASK[5]=255.255.255.0 INTERFACE_NAME[5]=lan5 BROADCAST_ADDRESS[5]=192.168.0.255 INTERFACE_STATE[5]=up After this, login as root and execute the following command at the command line to ensure that no IP address is configured on Token Ring adapter used for SNAplus2: # /usr/sbin/ifconfig lan unplumb where lan is the Token Ring interface.
HP-UX SNAplus2 R6.11.23.003 Release Notes Known Problems and Workarounds Known Problems and Workarounds The following are known problems in this version: • Coexistence problems between SNAplus2 Release 5.x and SNAplus2 Release 6.x may occur in a mixed Client/Server environment because SNAplus2 Release 5.x servers do not support Release 6.x systems. If you are running an SNAplus2 Release 5.x Client/Server environment, and you install a new system with SNAplus2 Release 6.
HP-UX SNAplus2 R6.11.23.003 Release Notes Compatibility Information and Installation Requirements Compatibility Information and Installation Requirements The following sections list the hardware and software requirements for the SNAplus2 Link product. For the hardware and software requirements for SNAplus2 User Applications, see the HP-UX SNAplus2 Installation Guide, available at: http://docs.hp.com/en/netcom.html#SNAplus2 Hardware Requirements SNAplus2 Link requires the following hardware: • 18.
HP-UX SNAplus2 R6.11.23.003 Release Notes Compatibility Information and Installation Requirements Running SNAplus2 Link in a client/server environment requires additional LAN/9000 Link software components for servers and workstations, including ARPA/Berkeley Sockets. Running SNAplus2 Link using QLLC requires X.25 (J2793A) software. Running SNAplus2 Link using Token Ring, 802.3/Ethernet, or FDDI requires software for each link type.
HP-UX SNAplus2 R6.11.23.003 Release Notes Fixes in This Version Fixes in This Version This section describes the software fixes included in this version of SNAplus2. Software Fixes If you are upgrading from an earlier version of SNAplus2 to R6.11.23.003, here is a list of known critical and serious problems from the earlier versions that have been fixed and included in this release. Table 1-1 Software Fixes SR Number 14 Problem 8606195995 Crash while trying to lock buffer from nps_free_rcb_mus.
HP-UX SNAplus2 R6.11.23.003 Release Notes Fixes in This Version Table 1-1 Software Fixes (Continued) SR Number Chapter 1 Problem 8606221968 Query_mode fails after doing initialize_session_limits. 8606227887 Hang up in node due to Streams schedule from interrupt context. 8606236273 Two duff error logs at the end of punch job to a program. 8606242140 Multi-threaded API hang up under stress. 8606267173 Hang up with full duplex LUA using pacing.
HP-UX SNAplus2 R6.11.23.003 Release Notes Fixes in This Version Table 1-1 Software Fixes (Continued) SR Number 16 Problem 5003393819 xsnapadmin - request syncpoint support for control point LU for node. 8606292248 ’ms_support’ parameter no more available under node definition. 8606289627 Assert in nlu.c. 8606291438 Hang in vpr_stream_uw_input_msg. 8606300552 SG TOC due to hang in sna_pcisdlc_v0_get_rw_lock. 8606306285 Reboot required after link fails to start.
HP-UX SNAplus2 R6.11.23.003 Release Notes Software Availability in Native Languages Software Availability in Native Languages This version of SNAplus2 is available only in English.
HP-UX SNAplus2 R6.11.23.
