HP-UX SNAplus2 Release Notes Version R6.11.11.100 HP 9000 Systems Manufacturing Part Number: J2745-90013 E0603 U.S.A. © Copyright 2003, Hewlett-Packard Company. All rights reserved.
Legal Notices The information in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material.
MS-DOS and Microsoft are U.S. registered trademarks of Microsoft Corporation. OpenGL is a registered trademark of Silicon Graphics, Inc. UNIX is a registered trademark in the United States and other countries, licensed exclusively through The Open Group.
1 HP-UX SNAplus2 R6.11.11.100 Release Notes Announcement This version of SNAplus2 (R6.11.11.100) is supported on machines running HP-UX 11i operating systems. SNAplus2 adds two new features with this release— Configuring PCI Token Ring for SNA and support for Euro currency symbol. Customers who want to take advantage of these features must upgrade their operating systems to HP-UX 11i.
HP-UX SNAplus2 R6.11.11.100 Release Notes What’s in This Version What’s in This Version This version of SNAplus2 is R6.11.11.100 and is referred to in this document as SNAplus2 R6.1. This version supports the HP-UX 11i operating system and introduces OLAR and Java CPI-C. Also, the list of hardware is updated to include additional supported servers. Benefits and Features • Configuring PCI Token Ring for SNA SAM can be used to configure a PCI Token Ring adapter for use by SNA.
HP-UX SNAplus2 R6.11.11.100 Release Notes What’s in This Version • OLAR The letters O, L, A and R stand for Online Addition [and] Replacement. This term refers to the ability of a PCI I/O card to be replaced (removed and/or added) to an HP-UX computer system designed to support this feature without the need for completely shutting down, then re-booting the system or adversely affecting other system components.
HP-UX SNAplus2 R6.11.11.100 Release Notes Known Problems and Workarounds Known Problems and Workarounds The following are known problems in this version: • If you plan to use SNAplus2 on HP-UX 11i to control a large number of resources (hundreds of sessions or conversations), we recommend that you install the following O/S patch: PHKL_23445. This patch is available to download at http://www.software.hp.com. • You cannot use SDLC with this release of SNAplus2 if an ACC card is installed in the system.
HP-UX SNAplus2 R6.11.11.100 Release Notes Compatibility Information and Installation Requirements Compatibility Information and Installation Requirements The following sections list the hardware and software requirements for the SNAplus2 Link product. For the hardware and software requirements for SNAplus2 User Applications, see the HP-UX SNAplus2 Installation Guide, J2740-90024.
HP-UX SNAplus2 R6.11.11.100 Release Notes Compatibility Information and Installation Requirements Optional Running xsnapadmin, the configuration and management GUI, requires the following: • Motif interface software • bit-mapped display to run X11 SNAplus2 APPN End Node The SNAplus2 APPN End Node requires the same hardware and software as the SNAplus2 Link.
HP-UX SNAplus2 R6.11.11.100 Release Notes Patches and Fixes in This Version Patches and Fixes in This Version This section describes the patches, software and document fixes included in this version of SNAplus2. Software Fixes If you are upgrading from an earlier version of SNAplus2 to R6.11.11.100, here is a list of known critical and serious problems from the earlier versions that have been fixed and included in this release.
HP-UX SNAplus2 R6.11.11.100 Release Notes Patches and Fixes in This Version Table 1-1 Software Fixes (Continued) SR Number Problem 8606266999 TM NMVT sent prior to UNBIND in LUA. 8606267173 RUI WRITE not completing : IPR issues in SNA. 8606268352 Critical buffer congestion detected. 8606204681 C++ CPI-C application core dumps from cmallc. 8606289627 Assert in nlu.c. 8606300552 SG TOC due to hang in sna_pcisdlc_v0_get_rw_lock.
HP-UX SNAplus2 R6.11.11.100 Release Notes Patches and Fixes in This Version Table 1-1 SR Number Software Fixes (Continued) Problem 1653311605 R6:RUI_TERM fails if RUI_INIT not completed. 4701424812 Viewing config with snap2adm results in config changes. 4701425355 R6: ACC system hang when using QLLC. 4701425561 R6 SNAplus2 11.00 Dynamic tp load fails after 2 hrs under load. 4701428094 R6.10.20 SNAplus2 Link - EISA PSI link fails to start without DSR. 4701429621 R6.10.20 SNAplus2 LINK -Dep.
HP-UX SNAplus2 R6.11.11.100 Release Notes Patches and Fixes in This Version Table 1-1 SR Number Software Fixes (Continued) Problem 8606106196 SNAplus2 R6.10.20 - Unable to add SDLC on T500 system - SAM core dumps. 8606106251 SNAplus2 R5.1 API PHNE_14874 incorrectly refs ../../o/lib/libnof.sl. 8606106291 R6.11.00.201 NIO PSI panic at sdl_reset_port+0x13c with SDLC L2 tracing. 8606106415 SNAplus2 R6.10.20 System panic when starting SDLC Link with PHNE_19407. 8606106417 R6.11.
HP-UX SNAplus2 R6.11.11.100 Release Notes Patches and Fixes in This Version Table 1-1 Software Fixes (Continued) SR Number Problem 8606151854 SNAplus2 R6.11.00.BB panicked in function nrm_process_cnos_reply+270. 8606158330 R6.10.20 APPC UNKNOWN VERB returned after RECEIVE_ALLOCATE_EX issued. 8606164859 Autodial not working on EISA SNAplus2 migration. 8606166322 R6.11 64-bit: LUA gets invalid data when received RU is segmented.
HP-UX SNAplus2 R6.11.11.100 Release Notes Patches and Fixes in This Version Table 1-2 Documentation Fixes (Continued) SR Number Problem 8606110474 deactivate_lu_0_to_3 not currently documented in NOF Programmers Guide. 8606110597 Incorrect parameter (card_type) listed for define_tr_dlc, define_ethernet_dlc and define_fddi_dlc commands in the SNAplus2 Admin. Command Reference. 8606131734 define_qllc_port address documentation is incorrect in the Admin Command Reference.
HP-UX SNAplus2 R6.11.11.100 Release Notes Software Availability in Native Languages Software Availability in Native Languages This version of SNAplus2 is available only in English.
