HP-UX SNAplus2 Release Notes (June 2001)

HP-UX SNAplus2 R6.11.11.001 Release Note
Known Problems and Workarounds
Chapter 18
Known Problems and Workarounds
The following are known problems in this version:
• If you plan to use SNAplus2 on HP-UX 11i to control a large number of resources
(hundreds of sessions or conversations), we recommend that you install the following O/S
patch: PHKL_23445. This patch is available to download at
http://www.software.hp.com.
• You cannot use SDLC with this release of SNAplus2 if an ACC card is installed in the
system. The only way to add an ACC port using this release is to allow a machine running
SNAplus2 R6.1 to manage ACC port functionality on a machine running R6.0 in a
client/server environment only. No physical SNAplus2 SDLC ACC links can exist on a
machine running SNAplus2 R6.1.
• Coexistence problems between SNAplus2 Release 5.x and SNAplus2 Release 6.x
may occur in a mixed Client/Server environment because SNAplus2 Release 5.x servers do
not support Release 6.x systems.
If you are running an SNAplus2 Release 5.x Client/Server environment, and you
install a new system with SNAplus2 Release 6.x software, you must upgrade all of the
SNAplus2 Release 5 systems to SNAplus2 R6.x to maintain compatibility:
For details on restrictions, refer to the HP-UX SNAplus2 Upgrade Guide (J2740-90023).
The following patch is available to correct a problem with the FDDI EISA driver:
• PHNE_22353 (HP-UX 11.00 for servers and workstations)
NOTE This is the latest patch as of this printing.