HP-UX SNAplus2 Release Notes (June 2001)

HP-UX SNAplus2 R6.11.11.001 Release Note

Patches and Fixes in This Version

Chapter 1 11

Patches and Fixes in This Version

Software Fixes

If you are upgrading from an earlier version of SNAplus2 to R6.11.11.001, here is a list of

known critical and serious problems from the earlier versions that have been ﬁxed and

included in this release.

Table 1-1 Software Fixes

SR Number Problem

1653299685 snap2adm: modiﬁcation of LS changes adj_cp_type to END_NODE.

1653301333 R6.1020 Invalid header created in trace ﬁles prevents formatting.

1653301382 R6.1020 snapcfgdae dies when launching xsnapadmin.

1653305284 R6 11.00 SNAplus2 SAM fails to build kernel after installing

PHCO_17631.

1653305805 R6: snapdaemon hangs in v0_get_rw_lock while shutting down.

1653307231 R6.1/11.0 SNAplus2 3270 cannot print whole page output with

SNAPRMPL=127.

1653311605 R6:RUI_TERM fails if RUI_INIT not completed.

4701424812 Viewing conﬁg with snap2adm results in conﬁg changes.

4701425355 R6: ACC system hang when using QLLC.

4701425561 R6 SNAplus2 11.00 Dynamic tp load fails after 2 hrs under load.

4701428094 R6.10.20 SNAplus2 Link - EISA PSI link fails to start without DSR.

4701429621 R6.10.20 SNAplus2 LINK -Dep. APPC LU, no BIND from host following

outage.

4701431064 R6.11.00 SNAplus2 panic at streams_uniput+0x88 sixr mux unlink

panic.

5003455253 Sending SIGTERM to HLLAPI library causes core dump.

5003462630 R5.1 SNAplus2 3270 printers report prog. chk 442 after system outage.