HP-UX SNAplus2 Release Notes Version R6.11.11.001 HP 9000 Systems Manufacturing Part Number: J2745-90012 E0601 U.S.A. © Copyright 2001, Hewlett-Packard Company. All rights reserved.
Legal Notices The information in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be held liable for errors contained herein or direct, indirect, special, incidental or consequential damages in connection with the furnishing, performance, or use of this material. Warranty.
©copyright 1980, 1984, 1986 Novell, Inc. ©copyright 1986-1992 Sun Microsystems, Inc. ©copyright 1985-86, 1988 Massachusetts Institute of Technology. ©copyright 1989-93 The Open Software Foundation, Inc. ©copyright 1986 Digital Equipment Corporation. ©copyright 1990 Motorola, Inc. ©copyright 1990, 1991, 1992 Cornell University ©copyright 1989-1991 The University of Maryland ©copyright 1988 Carnegie Mellon University ©copyright 1989-2001 Data Connection Limited Trademark Notices.
1 HP-UX SNAplus2 R6.11.11.001 Release Note Announcement This version of SNAplus2 (R6.11.11.001) is supported on machines running HP-UX 11i operating systems. SNAplus2 adds two new features with this release— OLAR and Java CPI-C. Customers who want to take advantage of these features must upgrade their operating systems to HP-UX 11i.
HP-UX SNAplus2 R6.11.11.001 Release Note What’s in This Version What’s in This Version This version of SNAplus2 is R6.11.11.001 and is referred to in this document as SNAplus2 R6.1. This version supports the HP-UX 11i operating system and introduces OLAR and Java CPI-C. Also, the list of hardware is updated to include additional supported servers. Benefits and Features • OLAR The letters O, L, A and R stand for Online Addition [and] Replacement.
HP-UX SNAplus2 R6.11.11.
HP-UX SNAplus2 R6.11.11.001 Release Note Known Problems and Workarounds Known Problems and Workarounds The following are known problems in this version: • If you plan to use SNAplus2 on HP-UX 11i to control a large number of resources (hundreds of sessions or conversations), we recommend that you install the following O/S patch: PHKL_23445. This patch is available to download at http://www.software.hp.com. • You cannot use SDLC with this release of SNAplus2 if an ACC card is installed in the system.
HP-UX SNAplus2 R6.11.11.001 Release Note Compatibility Information and Installation Requirements Compatibility Information and Installation Requirements The following sections list the hardware and software requirements for the SNAplus2 Link product. For the hardware and software requirements for SNAplus2 User Applications, see the HP-UX SNAplus2 Installation Guide, J2740-90022.
HP-UX SNAplus2 R6.11.11.001 Release Note Compatibility Information and Installation Requirements Running SNAplus2 Link using Token Ring, 802.3/Ethernet, or FDDI requires software for each link type. Optional Running xsnapadmin, the configuration and management GUI, requires the following: • Motif interface software • bit-mapped display to run X11 SNAplus2 APPN End Node The SNAplus2 APPN End Node requires the same hardware and software as the SNAplus2 Link.
HP-UX SNAplus2 R6.11.11.001 Release Note Patches and Fixes in This Version Patches and Fixes in This Version Software Fixes If you are upgrading from an earlier version of SNAplus2 to R6.11.11.001, here is a list of known critical and serious problems from the earlier versions that have been fixed and included in this release. Table 1-1 Software Fixes SR Number Problem 1653299685 snap2adm: modification of LS changes adj_cp_type to END_NODE. 1653301333 R6.
HP-UX SNAplus2 R6.11.11.001 Release Note Patches and Fixes in This Version Table 1-1 Software Fixes SR Number Problem 5003465237 R6: Snap3270 status line not displayed when in DO NOT ENTER condition. 5003466367 R6.11.00 SNAplus2 3270 system hang (looping) at nch_ssc-_receive+0x9b8. 5003467290 R5.1 SNAplus2 does not adjust max BTU for largest frame size on tr rout. 5003469213 R5.1 SNAplus2 3270 printer hangs with send/rec RU 0 bytes in BIND.
HP-UX SNAplus2 R6.11.11.001 Release Note Patches and Fixes in This Version Table 1-1 Software Fixes SR Number Problem 8606110894 R5 snap3270 is stopped and restarted, then HA_CONNECT_PS returns RC=9. 8606111714 R6.11.00 snamsgf fails with “Unable to open catalog file ./vsnamsg.cat”. 8606111815 R6.1029 SID’s ABM bit error on starting a QLLC connection. 8606112613 R6 SNAplus2 CICS for HP-UX fails to run after installing PHNE_17820/19071. 8606127677 SNAplus2 R6.11.
HP-UX SNAplus2 R6.11.11.001 Release Note Patches and Fixes in This Version Documentation Fixes The following changes have been made to the documentation and will become effective with this release. Table 1-2 Documentation Fixes SR Number Problem 1653245936 SNAplus2 Internal Trace not clear. (Corrected in Diagnostics Guide). 1653298133 Missing parameters in the SNAplus2 Admin. Command Reference. 4701430256 Device file information is misleading in the SNAplus2 Installation Guide.
HP-UX SNAplus2 R6.11.11.001 Release Note Software Availability in Native Languages Software Availability in Native Languages This version of SNAplus2 is available only in English.
