HP-UX SNAplus2 R7 NOF Programmer's Guide

NOF Indications
PU_INDICATION
One or more previous PU indications were lost. Later fields in this VCB may be set to zeros.
AP_NO
No previous PU indications were lost.
pu_name
Name of the PU (specified on the DEFINE_LS verb). This is an 8-byte type-A EBCDIC string, padded on
the right with spaces if the name is shorter than 8 characters.
description
A null-terminated text string describing the PU, as specified in the definition of the PU.
pu_sscp_sess_active
Specifies whether the PU-SSCP session is active (whether the ACTPU has been successfully processed).
Possible values are:
AP_YES
The PU-SSCP session is active.
AP_NO
The PU-SSCP session is inactive.
host_attachment
Local PU host attachment type.
Possible values are:
AP_DIRECT_ATTACHED
PU is directly attached to the host system.
AP_DLUR_ATTACHED
PU is supported by DLUR.
sscp_id
For dependent LU sessions, this parameter is the SSCP ID received in the ACTPU from the host for the PU
to which the local LU is mapped. For independent LU sessions, this parameter is set to
0 (zero). This value
is an array of six bytes displayed as hexadecimal values.
The following parameters are used only when the session state changes from active to inactive:
pu_sscp_stats.rcv_ru_size
Reserved (always set to zero).
pu_sscp_stats.send_ru_size
Reserved (always set to zero).
pu_sscp_stats.max_send_btu_size
Maximum BTU size that can be sent.
pu_sscp_stats.max_rcv_btu_size
Maximum BTU size that can be received.
pu_sscp_stats.max_send_pac_win
Reserved (always set to zero).
pu_sscp_stats.cur_send_pac_win
Reserved (always set to zero).
798