HP-UX SNAplus2 R7 NOF Programmer's Guide

NOF Indications
LU_0_TO_3_INDICATION
AP_YES
The session is active.
AP_NO
The session is not active.
host_attachment
LU host attachment type.
Possible values are:
AP_DIRECT_ATTACHED
LU is directly attached to the host system.
AP_DLUR_ATTACHED
LU is attached to the host system using DLUR
sscp_id
For dependent LU sessions, this parameter is the SSCP ID received in the ACTPU from the host for the PU
to which the local LU is mapped. For independent LU sessions, this parameter is set to
0
(zero). This value
is an array of six bytes displayed as hexadecimal values.
A
session_stats
structure is included for each of the two sessions (LU-SSCP session and PLU-SLU session). If the
session goes from active to inactive, the structure contains the following parameters; otherwise these parameters are
reserved.
rcv_ru_size
Maximum receive RU size. (In the LU-SSCP session statistics, this parameter is reserved.)
send_ru_size
Maximum send RU size. (In the LU-SSCP session statistics, this parameter is reserved.)
max_send_btu_size
Maximum BTU size that can be sent.
max_rcv_btu_size
Maximum BTU size that can be received.
max_send_pac_win
Maximum size of the send pacing window on this session. (In the LU-SSCP session statistics, this parameter
is reserved.)
cur_send_pac_win
Current size of the send pacing window on this session. (In the LU-SSCP session statistics, this parameter is
reserved.)
max_rcv_pac_win
Maximum size of the receive pacing window on this session. (In the LU-SSCP session statistics, this parameter
is reserved.)
cur_rcv_pac_win
Current size of the receive pacing window on this session. (In the LU-SSCP session statistics, this parameter
is reserved.)
send_data_frames
Number of normal flow data frames sent.
send_fmd_data_frames
787