HP-UX SNAplus2 R7 NOF Programmer's Guide

NOF Indications
LOCAL_LU_INDICATION
lu_alias
Locally defined LU alias. This is an 8-byte string in a locally displayable character set. All eight bytes are
significant.
nau_address
Network accessible unit (NAU) address of the LU. This value must be in the range
1–255. A nonzero value
implies that the LU is a dependent LU. The value
0
(zero) implies that the LU is an independent LU.
pu_name
Name of the physical unit (PU) that this LU uses. This is an 8-byte type-A EBCDIC string), padded on the
right with EBCDIC spaces. This parameter is significant only if the
nau_address parameter is not set to
0
(zero). If the nau_address parameter is set to
0, the pu_name parameter is set to all binary zeros.
lu_sscp_sess_active
Specifies whether the LU-SSCP session is active. If the nau_address parameter is set to
0 (zero), this parameter
is reserved. Possible values are:
AP_YES
The LU-SSCP session is active.
AP_NO
The LU-SSCP session is not active.
lu_sscp_stats.rcv_ru_size
This parameter is always reserved.
lu_sscp_stats.send_ru_size
This parameter is always reserved.
lu_sscp_stats.max_send_btu_size
Maximum basic transmission unit (BTU) that can be sent.
lu_sscp_stats.max_rcv_btu_size
Maximum basic transmission unit (BTU) that can be received.
lu_sscp_stats.max_send_pac_win
This parameter is always set to zero.
lu_sscp_stats.cur_send_pac_win
This parameter is always set to zero.
lu_sscp_stats.max_rcv_pac_win
This parameter is always set to zero.
lu_sscp_stats.cur_rcv_pac_win
This parameter is always set to zero.
lu_sscp_stats.send_data_frames
Number of normal flow data frames sent.
lu_sscp_stats.send_fmd_data_frames
Number of normal flow function management data (FMD) frames sent.
lu_sscp_stats.send_data_bytes
Number of normal flow data bytes sent.
lu_sscp_stats.rcv_data_frames
777