HP-UX SNAplus2 R7 NOF Programmer's Guide

NOF API Verbs
QUERY_STATISTICS
SDL_MIB_YES
LS supports SIM and RIM.
SDL_MIB_NOLS
does not support SIM and RIM.
sdl_ls_stats_table.xmit_rcv_cap
Specifies the LS’s transmit / receive capability. Possible values are:
SDL_MIB_HALF
Half-duplex
SDL_MIB_FULL
Full-duplex
Port statistics for SDLC:
sdl_port_stats_table.index
The index value used internally by SNAplus2 to identify the port.
sdl_port_stats_table.dwarf_frames
The number of frames received by the port that were too short to be valid.
sdl_port_stats_table.polls_out
Total number of polls sent to adjacent link stations.
sdl_port_stats_table.poll_rsps_out
Total number of polls responded to by adjacent link stations.
sdl_port_stats_table.local_busies
Total number of times the local link station has entered busy state (RNR).
sdl_port_stats_table.remote_busies
Total number of times remote link stations have entered busy state (RNR).
sdl_port_stats_table.iframes_in
The total number of I-frames received from adjacent link stations (including retries and out-of-order frames).
sdl_port_stats_table.iframes_out
The total number of I-frames transmitted to adjacent link stations (including retries and out-of-order frames).
sdl_port_stats_table.octets_in
The total number of bytes (not including FCSs) received from adjacent link stations.
sdl_port_stats_table.octets_out
The total number of bytes (not including FCSs) transmitted to adjacent link stations.
sdl_port_stats_table.protocol_errs
The number of times that SNAplus2 has deactivated an LS using this port because a frame received from the
adjacent link station contained a protocol error.
sdl_port_stats_table.activity_to_s
The number of times that SNAplus2 has deactivated an LS using this port because there was no activity on
the link.
sdl_port_stats_table.rnrlimit_s
665