HP-UX SNAplus2 R7 NOF Programmer's Guide

NOF API Verbs
QUERY_NODE
End Node or Branch Network Node: DLUR is supported, but will not be used to connect to a DLUS
in another subnet..
This value is not supported for a Network Node.
AP_NO
DLUR is not supported.
cp_create_parms.pu_conc_support
Specifies whether PU concentration is supported (
AP_YES
or AP_NO).
cp_create_parms.nn_rar
The network node’s route additional resistance.
cp_create_parms.hpr_support
Specifies the level of HPR (High Performance Routing) support provided by the node. Possible values are:
AP_NONE
No support for HPR.
AP_BASE
This node can perform automatic network routing (ANR) but cannot act as an RTP (Rapid Transport
Protocol) end point for HPR sessions.
AP_RTP
This node can perform automatic network routing (ANR) and can act as an RTP (Rapid Transport
Protocol) end point for HPR sessions.
AP_CONTROL_FLOWS
This node can perform all HPR functions including control flows.
cp_create_parms.max_ls_exception_events
The maximum number of LS exception events recorded by the node.
cp_create_parms.ptf
Array for configuring and controlling future program temporary fix (ptf) operation, as follows:
cp_create_parms.ptf[0]
REQDISCONT support and Mandatory Search Status support.
SNAplus2 normally uses REQDISCONT to deactivate limited resource host links that are no longer required
by session traffic. This byte can be used to suppress use of REQDISCONT, or to modify the settings used
on REQDISCONT requests sent by SNAplus2. Possible values:
AP_NONE
Use the normal REQDISCONT support.
AP_SUPPRESS_REQDISCONT
Do not use REQDISCONT.
AP_OVERRIDE_REQDISCONT
Use a modified version of REQDISCONT support. If REQDISCONT is specified, it must be combined
with one or both of the following values, using a logical OR operation:
AP_REQDISCONT_TYPE
582