HP-UX SNAplus2 R7 NOF Programmer's Guide

NOF API Verbs
QUERY_LS
AP_TR
Token Ring
AP_ETHERNET
Ethernet
AP_FDDI
FDDI
AP_IP
Enterprise Extender (HPR/IP)
ls_summary.state
State of this link station. This is one of the following:
AP_ACTIVE
The LS is active.
AP_NOT_ACTIVE
The LS is not active.
AP_PENDING_ACTIVE
The LS is being activated.
AP_PENDING_INACTIVE
The LS is being deactivated.
AP_PENDING_ACTIVE_BY_LR
The LS has failed (or an attempt to activate it has failed), and SNAplus2 is attempting to reactivate it.
ls_summary.act_sess_count
The total number of active sessions (both endpoint and intermediate) using the link.
ls_summary.det_adj_cp_name
Fully qualified name of the adjacent control point. The name is a 17-byte EBCDIC string, padded on the
right with EBCDIC spaces. It consists of a network ID of 1–8 A-string characters, an EBCDIC dot (period)
character, and a network name of 1–8 A-string characters.
This name is normally determined during activation; it is null if the LS is inactive. However, for an LS to a
back-level LEN node (specified by the
adj_cp_type parameter on DEFINE_LS), this name is taken from the
LS definition and is not determined during activation.
ls_summary.det_adj_cp_type
Type of the adjacent node. This is one of the following:
AP_APPN_NODE
Node type is unknown, or LS is inactive.
AP_END_NODE
End node, Branch Network Node acting as an End Node from the local node’s perspective, or up-level
LEN node (one that includes the Network Name CV in its XID3).
AP_NETWORK_NODE
Network node, or Branch Network Node acting as a Network Node from the local node’s perspective.
AP_VRN
Virtual routing node.
495