HP-UX SNAplus2 R7 NOF Programmer's Guide

NOF API Verbs
QUERY_LOCAL_LU
local_lu_detail.det_data.lu_sscp_stats.max_rcv_btu_size
Maximum BTU size that can be received.
local_lu_detail.det_data.lu_sscp_stats.max_send_pac_win
This parameter is always set to zero.
local_lu_detail.det_data.lu_sscp_stats.cur_send_pac_win
This parameter is always set to zero.
local_lu_detail.det_data.lu_sscp_stats.max_rcv_pac_win
This parameter is always set to zero.
local_lu_detail.det_data.lu_sscp_stats.cur_rcv_pac_win
This parameter is always set to zero.
local_lu_detail.det_data.lu_sscp_stats.send_data_frames
Number of normal flow data frames sent
local_lu_detail.det_data.lu_sscp_stats.send_fmd_data_frames
Number of normal flow function management data (FMD) frames sent.
local_lu_detail.det_data.lu_sscp_stats.send_data_bytes
Number of normal flow data bytes sent.
local_lu_detail.det_data.lu_sscp_stats.rcv_data_frames
Number of normal flow data frames received.
local_lu_detail.det_data.lu_sscp_stats.rcv_fmd_data_frames
Number of normal flow FMD data frames received.
local_lu_detail.det_data.lu_sscp_stats.rcv_data_bytes
Number of normal flow data bytes received.
local_lu_detail.det_data.lu_sscp_stats.sidh
Session ID high byte.
local_lu_detail.det_data.lu_sscp_stats.sidl
Session ID low byte.
local_lu_detail.det_data.lu_sscp_stats.odai
Origin Destination Assignor Indicator. When bringing up a session, the sender of the ACTLU sets this
parameter to zero if the local node contains the primary link station, and sets it to one if the ACTLU sender
is the node containing the secondary link station.
local_lu_detail.det_data.lu_sscp_stats.ls_name
Link station name associated with the statistics This is an 8-byte string in a locally displayable character set.
All eight bytes are significant. This parameter can be used to correlate this session with the link over which
the session flows.
local_lu_detail.det_data.lu_sscp_stats.pacing_type
Receive pacing type in use on the LU-SSCP session. This parameter is set to
AP_NONE.
local_lu_detail.det_data.sscp_id
This parameter is a 6-byte field containing the SSCP ID received in the ACTPU for the PU used by this LU.
This parameter is used only by dependent LUs, and is set to all binary zeros for independent LUs or if
lu_sscp_sess_active is not set to
AP_YES.
478