HP-UX SNAplus2 R7 NOF Programmer's Guide

NOF API Verbs
DEFINE_PORT
For Enterprise Extender (HPR/IP), this parameter is reserved.
For Enterprise Extender (HPR/IP), this parameter is reserved.
Specifies the DSPU template, defined on the DEFINE_DSPU_TEMPLATE verb. This template is used for
definitions if the local node is to provide PU concentration for an implicit link activated on this port. If the
template specified does not exist or is already at its instance limit when the link is activated, activation will
fail. This template name is an 8-byte string in a locally displayable character set.
If the
implicit_dspu_services parameter is not set to AP_PU_CONCENTRATION, the implicit_dspu_template
parameter is reserved.
def_data.implicit_ls_limit
Specifies the maximum number of implicit link stations that can be active on this port simultaneously, including
dynamic links and links activated for Discovery. Specify a value in the range 1–65,534 or specify 0 (zero)
to indicate no limit. A value of AP_NO_IMPLICIT_LINKS indicates that no implicit links are allowed.
def_data.implicit_dspu_services
For Enterprise Extender (HPR/IP), this parameter is reserved.
Specifies the services that the local node will provide to the downstream PU across implicit links activated
on this port. Possible values are:
AP_DLUR
Local node will provide DLUR services for the downstream PU (using the default DLUS configured
through the DEFINE_DLUR_DEFAULTS verb).
AP_PU_CONCENTRATION
Local node will provide PU concentration for the downstream PU. It will also put in place definitions
as specified by the DSPU template specified for the parameter implicit_dspu_template.
AP_NONE
Local node will provide no services for this downstream PU.
def_data.implicit_deact_timer
If implicit_hpr_support is set to AP_YES and implicit_limited_resource is set to AP_NO_SESSIONS,an
HPR-capable implicit link is automatically deactivated if no data flows on it for the time specified by this
parameter and no sessions are using the link.
Implicit limited resource link deactivation timer (in seconds). If implicit_limited_resource is set to
AP_INACTIVITY, an implicit link using this port will be deactivated if no data flows on it for the time
specified by this parameter.
The minimum value is 5; values in the range 1–4 will be interpreted as 5. Zero indicates no timeout (the
link is not deactivated, as though implicit_limited_resource were set to AP_NO). This parameter is reserved
if implicit_limited_resource is set to any value other than AP_INACTIVITY.
def_data.act_xid_exchange_limit
Activation XID exchange limit.
def_data.nonact_xid_exchange_limit
Non-activation XID exchange limit.
def_data.ls_xmit_rcv_cap
Specifies the link station transmit/receive capability. Possible values are:
AP_LS_TWS
Two-way simultaneous
237