HP-UX SNAplus2 R7 NOF Programmer's Guide

NOF API Verbs
DEFINE_LS
AP_INVALID_TG_NUMBER
The TG number supplied was not in the valid range.
AP_MISSING_CP_NAME
A TG number was defined, but no CP name was supplied.
AP_MISSING_CP_TYPE
A TG number was defined, but no CP type was supplied.
AP_MISSING_TG_NUMBER
The link was defined to be auto-activated, but no TG number was supplied.
AP_PARALLEL_TGS_NOT_SUPPORTED
This node cannot support more than one LS defined between it and the same adjacent node.
AP_INVALID_DLUS_RETRY_LIMIT
The value specified for
dlus_retry_limit was not valid.
AP_INVALID_DLUS_RETRY_TIMEOUT
The value specified for dlus_retry_timeout was not valid.
AP_INVALID_LS_ROLE
The value specified for the ls_role parameter is not valid.
AP_INVALID_NODE_TYPE_FOR_HPR
The node type specified for the adj_cp_type parameter does not support HPR.
AP_INVALID_BTU_SIZE
The value specified for the max_send_btu_size parameter was not valid.
AP_INVALID_MAX_IFRM_RCVD
The value specified for the max_ifrm_rcvd parameter was not valid.
AP_UNKNOWN_IP_HOST
The string specified for the remote_hostname parameter could not be resolved to a valid IP address.
AP_INVALID_BRANCH_LINK_TYPE
The branch_link_type parameter was not set to a valid value.
AP_INVALID_BRNN_SUPPORT
The adj_brnn_cp_support parameter was not set to a valid value.
AP_BRNN_SUPPORT_MISSING
The adj_brnn_cp_support parameter was set to
AP_BRNN_ALLOWED; this value is not valid because
the adjacent node is a Network Node and auto_act_supp is set to AP_YES.
AP_INVALID_UPLINK
The branch_link_type parameter was set to AP_UPLINK, but the definition of an existing LS between
the local and adjacent nodes specifies that it is a downlink. The branch link type must be the same for
all LSs between the same two nodes.
AP_INVALID_DOWNLINK
The branch_link_type parameter was set to AP_DOWNLINK, but the definition of an existing LS between
the local and adjacent nodes specifies that it is an uplink. The branch link type must be the same for
all LSs between the same two nodes.
AP_INVALID_LINK_SPEC_FORMAT
A reserved parameter was set to a nonzero value.
191