HP-UX SNAplus2 R7 NOF Programmer's Guide

NOF API Verbs
DEFINE_LS
def_data.solicit_sscp_sessions
For an Enterprise Extender (HPR/IP) port, this parameter is reserved.
Specifies whether to request the adjacent node to initiate sessions between the SSCP and the local CP and
dependent LUs. This parameter is used only if the adjacent node is an APPN node (
adj_cp_type is either
AP_NETWORK_NODE or AP_END_NODE); it is ignored otherwise. If the adjacent node is a host (adj_cp_type
is either AP_HOST_XID3 or AP_HOST_XID0), SNAplus2 always requests the host to initiate SSCP sessions.
Possible values are:
AP_YES
Request the adjacent node to initiate SSCP sessions.
AP_NO
Do not request the adjacent node to initiate SSCP sessions.
If the adjacent node is an APPN node and dspu_services is set to a value other than AP_NONE, this parameter
must be set to AP_NO.
def_data.pu_name
For an Enterprise Extender (HPR/IP) port, this parameter is reserved.
Name of the local PU that uses this link. This parameter is used only if adj_cp_type is set to AP_HOST_XID3
or AP_HOST_XID0,orifsolicit_sscp_sessions is set to AP_YES; it is ignored otherwise. This is an 8-byte
alphanumeric type-A EBCDIC string (starting with a letter), padded on the right with EBCDIC spaces.
def_data.disable_remote_act
Specifies whether to prevent activation of the LS by the remote node. Possible values are:
AP_YES
The LS can only be activated by the local node; if the remote node attempts to activate it, SNAplus2
will reject the attempt.
AP_NO
The LS can be activated by the remote node.
def_data.dspu_services
For an Enterprise Extender (HPR/IP) port, this parameter is reserved.
Specifies the services which the local node will provide to the downstream PU across this link. This parameter
is used only if the adjacent node is a downstream PU or an APPN node with solicit_sscp_sessions set to
AP_NO; it is reserved otherwise. Possible values are:
AP_PU_CONCENTRATION
Local node will provide PU concentration for the downstream PU. The local node must be defined to
support PU concentration.
AP_DLUR
Local node will provide DLUR services for the downstream PU. The local node must be defined to
support DLUR. (Not supported on end node.)
AP_NONE
Local node will provide no services for this downstream PU.
def_data.dspu_name
For an Enterprise Extender (HPR/IP) port, this parameter is reserved.
176