HP-UX SNAplus2 R7 Installation Guide

Installing SNAplus2 Client Software on Windows Clients
Advanced Options for Windows Client Configuration
Chapter 5 57
Advanced Options for Windows Client
Configuration
The Advanced Options window enables you to configure some advanced
parameters for the Windows client. Most users do not need to alter these
parameters, but you can adjust the default settings if necessary.
LAN access time-out
Specify the time in seconds that the socket can remain
idle before it is closed. When this check box is empty, no
LAN access time-out has been specified (and so an
infinite timeout will be used). If you check this box, the
minimum value of 60 (for 60 seconds) is displayed in
the adjacent field. You can change that value by
entering a new value. If you check the box, a value
must be specified.
Max. broadcast attempts
Specify the maximum number of times the client
attempts to connect to a server by broadcast. When the
Advanced Options window is opened, the default value
of 5 is displayed. The value in this box is used only if
the UDP broadcasts check box is checked on the main
Configuration window.
Reconnect time-out
Specify the time in seconds that the client waits before
attempting to reconnect to a server after the server has
gone down. When the Advanced Options window is
opened, the default value of 200 is displayed.
For more information about these parameters, press Help.
When you have completed the Advanced Options window, click on OK. If
you have completed the screen properly, the Setup program returns to
the Configuration window. If you are installing a new Windows client,
return to Step 6. Otherwise, click on the OK button in the Configuration
dialog to complete the configuration.