HP-UX SNAplus2 R7 Installation Guide

Installing SNAplus2 Client Software on Windows Clients
Installing Windows Client Software Using the Setup Program
Chapter 554
Step 4. If the source from which you are running the Setup program does not
contain all the required files, the program prompts you for a directory or
server name.
Enter the name of a directory or the name or TCP/IP address of server
running HP-UX on which the required files are located. If you specify a
server name or address, the program attempts to download the
SNAplus2 files from the specified server.
If the information you specified is not sufficient to locate copies of the
SNAplus2 files, the program displays this screen again.
Step 5. When the required files have been copied, the Setup program displays
the Configuration window.
Default 3270 user and group names are configured in the domain
configuration file. For more information, see the HP-UX SNAplus2
Administration Guide. If you do not wish to use these default values then
you can configure them as shown below:
All Windows clients:
Group Name If you do not wish to use the default 3270 group name
then specify a group name. Choose a group name that
has already been added to the configuration file. For
more information, see the HP-UX SNAplus2
Administration Guide.
Domain Specify the SNAplus2 client-server domain name.
The following settings are optional:
Add Server
Specify up to nine servers to which this client can
connect. You may use the slide buttons to move servers
up and down the list. The order in which servers
appear in this list is the order in which the client
selects these servers. If the client cannot connect to the
first server on the list, the next server is tried.
Delete Server
Delete a server from the list of servers to which this
client can connect.
UDP broadcasts