HP-UX SNAplus2 R7 Installation Guide

Installation Requirements
HP SNAplus2 Link Hardware and Software Requirements
Chapter 18
HP 9000 Hardware Requirements supported on
HP-UX 11i v1
HP SNAplus2 Link requires the following HP 9000 hardware:
• HP 9000 servers rp8400, rp7410, A-class (rp24xx), L-class (rp54xx),
N-class (rp74xx), K-class, V-class, D-class, R-class, HP 9000
SuperDome, B, C, J class workstations.
HP 9000 Software Requirements supported on HP-UX
11i v1
HP SNAplus2 Link requires the following HP 9000 software:
• HP-UX 11i operating system and the Support Plus Software bundle.
Running HP SNAplus2EE Link in a client/server environment requires
additional LAN/9000 Link software components for servers and
workstations.
Running HP SNAplus2EE Link using QLLC requires X.25 (J2793A)
software.
Running HP SNAplus2EE Link using Token Ring, 802.3/Ethernet, or
FDDI requires software for each link type.
HP 9000 and HP Integrity Servers Hardware
Requirements on 11i v2
HP SNAplus2 Link requires the following HP 9000 hardware:
• HP 9000 servers rp8400, rp7410, rp34x0, rp4440, A-class (rp2400),
L-class (rp5400), N-class (rp7400), HP 9000 Superdome and Integrity
Servers rx2600, rx4640, IPF Superdome, rx56xx, rx8620.
• 18.9 MB of disk space
• A physical link to the SNA remote system, such as a pair of
compatible modems, a modem eliminator, or a LAN connection.
• A PCI card and available slot if using PCI SDLC (card number:
J3525A).