HP-UX SNAplus2 R7 Installation Guide

Installation Requirements
HP SNAplus2 Link Hardware and Software Requirements
Chapter 1 7
HP SNAplus2 Link Hardware and Software
Requirements
Certain hardware and software requirements must be met on the SNA
remote system. This section describes the HP SNAplus2 Link hardware
and software requirements for the remote system.
Host System Hardware
HP SNAplus2 Link requires the following IBM host system hardware:
• IBM eServer zSeries (for example, 800. 890, 900, 990)
• OSA or OSA/Express network adapters
Host System Software
HP SNAplus2 Link requires the following IBM host system software:
• OS/390 version 2.7 and higher
• Communication server for OS/390 v6 (with APAR OW36113)
AS/400 System Hardware
HP SNAplus2 Link requires an SDLC or Token Ring communications
controller card installed on an IBM AS/400 computer system.
AS/400 System Software
HP SNAplus2 Link requires an OS/400 operating system (all
SNA-related software is included within the OS/400 operating system).
HP will support certain versions, releases, modifications and PTF levels
of the remote system software. The Hewlett-Packard sales
representative can determine whether HP SNAplus2 Link and
associated HP-UX SNAplus2 Presentation Services products can be
supported with your particular remote system configuration.