HP-UX SNAplus2 R7 Administration Command Reference

Administration Commands
status_dependent_lu
Return status for all dependent LUs.
DISPLAY
Return status for all dependent display LUs.
PRINTER
Return status for all dependent printer LUs.
RJE
Return status for all dependent LUs used for Remote Job Entry (RJE).
LU6
Return status for all dependent LUs of type 6.2.
OTHER
Return status for all dependent LUs that are not used for display, printer, RJE, or dependent LU type
6.2.
2.200.2 Returned Information
The following status information is returned:
• Physical units (PUs) are displayed as either Inactive or SSCP, depending on whether the PU-SSCP session
is active.
• Each logical unit (LU) on the PU is displayed as one of the following:
Inactive
Indicates that the session between the LU and the system services control point (the LU-SSCP session)
is inactive.
SSCP
Indicates that the session between the primary LU and the secondary LU (the PLU-SLU session) is
inactive.
Active
Indicates that both the LU-SSCP and the PLU-SLU sessions are active.
If the node that owns the PU is a SNAplus2 version earlier than Version 5.2, the status for a dependent LU type
6.2 displays either as Inactive or Active.
If an LU is in use by an application, SNAplus2 displays additional information. Table 2–4,
Additional Information
by Application Type, shows what kind of information is displayed for a given application type.
Table 2–4 Additional Information by Application Type
Application Type Information Displayed
Unknown or LUA application
Unknown/LUA application
PU concentration
Downstream LU: dslu_name
FMI application (3270)
3270 display user: user_name
Computer: system_name
or
3270 printer
user: user_name
Computer: system_name
610