HP-UX SNAplus2 R7 Administration Command Reference

Administration Commands
set_trace_file
Parameter Check
No parameter errors occur for this command.
State Check
No specific state errors, other than those listed in Appendix A, Common Return Codes from snapadmin Commands,
occur for this command.
Other Conditions
Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary
return codes that are common to all commands.
2.192 set_trace_file
The set_trace_file command specifies the name of the file that SNAplus2 uses to record trace data.
If you issue a second set_trace_file command specifying a new file name for the same file type, all subsequent
trace data will be written to the new file; the existing file is not removed, but further information will not be written
to it.
To reset the current trace file or files while tracing is active (the existing contents of the file are discarded, but any
subsequent tracing is written to the same file), issue a set_trace_file command specifying the same trace file
name and backup file name as the files that are currently being used.
This command may be issued to a running node, or (for client-server trace files only) to a HP-UX client computer
on which the SNAplus2 software is running. To issue the command to a client computer, use the
snapadmin
program
on the client computer without specifying a node name.
On Windows clients, tracing is controlled by options in the Windows Registry(Win32 clients) or in the sna.ini
file (Win16 clients). For more information, refer to HP-UX SNAplus2 Diagnostics Guide.
2.192.1 Supplied Parameters
Parameter name Type Length Default
[set_trace_file]
trace_file_type constant IPS
dual_files constant LEAVE_UNCHANGED
trace_file_size decimal 1000000
file_name character 80 (null string)
file_name_2 character 80 (null string)
Supplied parameters are:
trace_file_type
The type of trace file. Possible values are:
CS
File contains tracing on data transferred across the SNAplus2 domain between the specified computer
and other nodes. This type of tracing is activated by the set_cs_trace command.
BCK_CS
File contains tracing on data transferred across the SNAplus2 domain between a current-level server
and back-level computers. This type of tracing is activated by the set_bck_cs_trace command.
594