HP-UX SNAplus2 R7 Administration Command Reference

Administration Commands
define_3270_diag
INVALID_MODE_NAME
The mode_name parameter did not match any defined mode name.
INVALID_PLU_NAME
The fqplu_name parameter did not match any defined partner LU name.
State Check
No specific state errors, other than those listed in Appendix A, Common Return Codes from snapadmin Commands,
occur for this command.
Other Conditions
Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary
return codes that are common to all commands.
2.9 define_3270_diag
The define_3270_diag command specifies the 3270 diagnostics parameters for the SNAplus2 system, such as
the parameters used to record and display response-time data and the 3270 user alerts that users can send to the
host NetView program. The command can be used to define 3270 diagnostics parameters for the first time or to
modify an existing definition.
This command is not associated with a particular node because the 3270 diagnostics parameters are defined as
domain resources.
2.9.1 Supplied Parameters
Parameter name Type Length Default
[define_3270_diag]
rtm_overflow constant NO
rtm_unbind constant NO
rtm_timer_option constant RTM_SCREEN
rtm_thresh1 decimal 0.5
rtm_thresh2 decimal 1.0
rtm_thresh3 decimal 2.0
rtm_thresh4 decimal 5.0
{alert_3270_data}
description character 53 (null string)
parameter1 character 33 (null string)
parameter2 character 33 (null string)
parameter3 character 33 (null string)
(You can include 0–20 alert_3270_data subrecords.)
Supplied parameters are:
rtm_overflow
Specifies whether to send RTM data to the host every time one of the RTM counters overflows (reaches its
maximum value). There is a counter for each of the intervals defined by the rtm_thresh values. Possible
values are:
YES
57