HP-UX SNAplus2 R7 Administration Command Reference

Administration Commands
query_rcf_access
The list_options parameter was set to LIST_INCLUSIVE to list all entries starting from the supplied
name, but the value specified in the pu_name parameter was not valid.
State Check
If the command does not execute because of a state error, SNAplus2 returns the following parameters:
primary_rc
STATE_CHECK
secondary_rc
INVALID_PU_TYPE
The PU specified by the pu_name parameter is a remote PU and not a local PU.
Other Conditions
Appendix A, Common Return Codes from snapadmin Commands, lists additional combinations of primary and
secondary return codes that are common to all commands.
2.162 query_rcf_access
The query_rcf_access command returns information about the permitted access to the SNAplus2 Remote
Command Facility (RCF): the user ID used to run UNIX Command Facility (UCF) commands, and the restrictions
under which administration commands can be issued using the Service Point Command Facility (SPCF). This
information was previously defined using define_rcf_access. For more information about SPCF and UCF,
refer to the HP-UX SNAplus2 Administration Guide.
Because RCF access parameters are defined as domain resources, this command is not associated with a particular
node.
2.162.1 Supplied Parameters
[query_rcf_access]
No parameters are supplied for this command.
2.162.2 Returned Parameters
Parameter name Type Length
ucf_username character 31
spcf_permissions constant
If the command executes successfully, SNAplus2 returns the following parameters:
ucf_username
Specifies the HP-UX user name of the UCF user. All UCF commands are run using the user ID for this user,
with the default shell and access permissions defined for this user.
If this parameter is not set, UCF access is denied.
spcf_permissions
Specifies the types of SNAplus2 administration commands that can be accessed using SPCF. To prevent
access to SPCF, set this parameter to NONE. To allow access to SPCF, set this parameter to one or more of
the following values (combined using a + character):
515