HP-UX SNAplus2 R7 Administration Command Reference

Administration Commands
query_port
For Enterprise Extender (HPR/IP), the following parameters are included. The parameters lsap—
determined_ip_address are described below; for more information about the remaining parameters, see Section
2.33, define_ip_port.
lsap hex number
version decimal
determined_ip_address character
ip_ack_timeout decimal
ip_max_retry decimal
liveness_timeout decimal
short_hold_mode constant
local_ip_interface character 32
If the command executes successfully and you specified DETAIL as the list_options parameter value, SNAplus2
returns the following parameters:
port_name
Name of the port.
port_state
Specifies the current state of the port. Possible values are:
ACTIVE
The port is active.
NOT_ACTIVE
The port is not active.
PENDING_ACTIVE
The start_port command is in progress.
PENDING_INACTIVE
The stop_port command is in progress.
dlc_type
DLC type for the port. Possible values are:
SDLC
Synchronous data link control
QLLC
Qualified logical link control
TR
Token Ring
ETHERNET
Ethernet
FDDI
Fiber distributed data interface
HPRIP
Enterprise Extender (HPR/IP)
port_sim_rim
Specifies whether set initialization mode (SIM) and receive initialization mode (RIM) are supported. Possible
values are:
508