HP-UX SNAplus2 R7 Administration Command Reference

Administration Commands
query_port
write_timer_retry decimal
link_conn_timer decimal
link_conn_timer_retry decimal
pri_fdplx constant
sec_fdplx constant
use_rej constant
spec_port_type constant
max_xid_size decimal
max_retry_count decimal
opt1 constant
opt2 constant
linesp decimal
rcv_pool_size decimal
poll_wait decimal
hmod_data character
contact_timer decimal
contact_timer_retry decimal
contact_timer2 decimal
contact_timer_retry2 decimal
disc_timer decimal
disc_timer_retry decimal
nve_poll_timer decimal
nve_poll_timer_retry decimal
nve_poll_timer2 decimal
nve_poll_timer_retry2 decimal
no_resp_timer decimal
no_resp_timer_retry decimal
rem_busy_timer decimal
rem_busy_timer_retry decimal
rr_timer decimal
poll_frame constant
poll_on_iframe constant
For QLLC, the following parameters are included. For more information about these parameters, see Section 2.46,
define_qllc_port.
address character 14
cud_mode constant
cud_match character 16
add_mode constant
add_len decimal
vc_type constant
loc_packet decimal
rem_packet decimal
loc_wsize decimal
rem_wsize decimal
retry_limit decimal
retry_timeout decimal
idle_timeout decimal
For Token Ring, Ethernet, or FDDI, the following parameters are included. For more information about these
parameters, see Section 2.61, define_tr_port, define_ethernet_port, define_fddi_port.
mac_address hex array
lsap_address hex number
test_timeout decimal
test_retry_limit decimal
xid_timeout decimal
xid_retry_limit decimal
t1_timeout decimal
t1_retry_limit decimal
507