HP-UX SNAplus2 R7 Administration Command Reference

Administration Commands
query_lu_0_to_3
Type of application using this LU. This parameter is set to TN_SERVER.
user_ip_address
The dotted-decimal IP address of the computer where the TN3270 program is running.
port_number
The TCP/IP port number that the TN3270 program uses to access TN server.
cb_number
TN server control block number.
cfg_default
Specifies whether the TN3270 program is using an explicitly defined TN server user record or is using the
configured default record. For more information about configuring a default TN server user record, see Section
2.54,
define_tn3270_access. Possible values are:
YES
The program is using the default record. The cfg_address and cfg_format parameters are reserved.
NO
The program is using an explicitly defined record.
cfg_address
The TCP/IP address of the computer on which the TN3270 program runs, as defined in the configuration
record that this user is using.
The address may be specified as a dotted-decimal IP address (such as 193.1.11.100), as a name (such
as newbox.this.co.uk), or as an alias (such as newbox); the format is indicated by the cfg_format
parameter.
cfg_format
Specifies the format of the cfg_address parameter. Possible values are:
IP_ADDRESS
IP address
FULLY_QUALIFIED_NAME
Alias or fully qualified name
tn3270_level
Level of TN3270 support. Possible values are:
LEVEL_TN3270
TN3270E protocols are disabled.
LEVEL_TN3270E
TN3270E protocols are enabled.
lu_select
Method of LU selection. Possible values are:
GENERIC_LU
This LU can be used by any TN3270 program that requests a generic display or printer LU.
SPECIFIC_LU
This LU can be used only by a TN3270 program that names this LU specifically.
ASSOCIATED_LU
442