HP-UX SNAplus2 R7 Administration Command Reference

Administration Commands
query_downstream_pu
NO
The session is not active.
dspu_services
Specifies the type of services provided to the PU.
Possible values are:
PU_CONCENTRATION
Downstream PU is served by PU concentration.
DLUR
Downstream PU is served by DLUR.
rcv_ru_size
Maximum receive RU size; this parameter is reserved (set to
0) if the downstream PU is served by PU
concentration.
send_ru_size
Maximum send RU size; this parameter is reserved (set to 0) if the downstream PU is served by PU
concentration.
max_send_btu_size
Maximum BTU size that can be sent.
max_rcv_btu_size
Maximum BTU size that can be received.
send_data_frames
Number of normal flow data frames sent.
send_fmd_data_frames
Number of normal flow FMD data frames sent.
send_data_bytes
Number of normal flow data bytes sent.
rcv_data_frames
Number of normal flow data frames received.
rcv_fmd_data_frames
Number of normal flow FMD data frames received.
rcv_data_bytes
Number of normal flow data bytes received.
The following three parameters identify the Local Form Session Identifier (LSFID):
sidh
Session ID high byte.
sidl
Session ID low byte.
odai
Origin Destination Assignor Indicator. Possible values are:
YES
379