HP-UX SNAplus2 R7 Administration Command Reference

Administration Commands
query_downstream_pu
Name of the PU for which information is required, as specified on define_*_ls, or the name to be used
as an index into the list of PUs. This value is ignored if list_options is set to FIRST_IN_LIST. The name
is a type-A character string.
dspu_services
DSPU services filter. Specifies whether to filter the returned information by the type of services provided to
the PUs. Possible values are:
PU_CONCENTRATION
Return information only about downstream PUs served by PU concentration.
DLUR
Return information only about downstream PUs served by DLUR.
NONE
Return information about all downstream PUs.
2.129.2 Returned Parameters
Parameter name Type Length
dspu_name character 8
description character 31
ls_name character 8
pu_sscp_sess_active constant
dspu_services constant
rcv_ru_size decimal
send_ru_size decimal
max_send_btu_size decimal
max_rcv_btu_size decimal
send_data_frames decimal
send_fmd_data_frames decimal
send_data_bytes decimal
rcv_data_frames decimal
rcv_fmd_data_frames decimal
rcv_data_bytes decimal
sidh hex number
sidl hex number
odai constant
pacing_type constant
If the command executes successfully, SNAplus2 returns the following parameters:
dspu_name
Name of the downstream PU.
description
A text string describing the LS to the downstream PU, as specified in the definition of the LS.
ls_name
Name of the LS used to access the downstream PU.
pu_sscp_sess_active
Specifies whether the PU-SSCP session to the downstream PU is active. Possible values are:
YES
The session is active.
378