HP-UX SNAplus2 R7 Administration Command Reference

Administration Commands
query_downstream_lu
Number of normal flow data bytes sent.
rcv_data_frames
Number of normal flow data frames received.
rcv_fmd_data_frames
Number of normal flow FMD data frames received.
rcv_data_bytes
Number of normal flow data bytes received.
The following three parameters identify the Local Form Session Identifier (LFSID) for a session. The LFSID
consists of the following parameters:
sidh
Session ID high byte. (In the upstream PLU-SLU session statistics for an LU served by PU concentration,
this parameter is reserved.)
sidl
Session ID low byte. (In the upstream PLU-SLU session statistics for an LU served by PU concentration,
this parameter is reserved.)
odai
Origin Destination Assignor Indicator. (In the upstream PLU-SLU session statistics for an LU served by PU
concentration, this parameter is reserved.) Possible values are:
YES
The BIND sender is the node containing the secondary link station.
NO
The BIND sender is the node containing the primary link station.
ls_name
Link station name associated with statistics. (In the upstream PLU-SLU session statistics for an LU served
by PU concentration, this parameter is reserved.)
pacing_type
The type of receive pacing in use on this session. Possible values are:
NONE
FIXED
The following parameters are not preceded by a session type prefix:
description
A text string describing the downstream LU, as specified in the definition of the downstream LU.
This parameter is reserved for a DLUR-supported LU.
nau_address
Network accessible unit address of the downstream LU. This address is in the range
1–255.
dspu_name
Name of the PU associated with the downstream LU.
host_lu_name
For an LU supported by PU concentration, the name of the host LU or host LU pool that the downstream
LU uses.
375