HP-UX SNAplus2 R7 Administration Command Reference

Administration Commands
query_dlur_lu
lu_name
Name of the LU.
2.124.3 Returned Parameters: Detailed Information
Parameter name Type Length
lu_name character 8
pu_name character 8
dlus_name character 17
lu_location constant
nau_address decimal
plu_name character 17
rscv_len hex array 256
If the command executes successfully and you specified DETAIL as the list_options parameter value, SNAplus2
returns the following parameters:
lu_name
Name of the LU.
pu_name
Name of the PU associated with the LU.
dlus_name
If the SSCP-LU session is active, this parameter contains the name of the DLUS node used by the LU; it is
not used otherwise.
lu_location
Location of LU.
Possible values are:
INTERNAL
LU is on the local node.
DOWNSTREAM
LU is on a downstream node (network node only).
nau_address
Network accessible unit (NAU) address of the LU, in the range
1–255.
plu_name
If the PLU-SLU session is active, this parameter contains the name of the PLU; otherwise, it is set to 17
zeros.
rscv_len
Route Selection control vector (RSCV) as defined in Systems Network Architecture: Formats. This control
vector defines the session route through the network and is carried on the BIND. This RSCV is included only
if the node’s configuration indicates that DLUR RSCVs should be stored and the PLU-SLU session is active.
2.124.4 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a
secondary return code to provide specific details about the reason for unsuccessful execution.
359