HP-UX SNAplus2 R7 Administration Command Reference
Administration Commands
query_cos_tg_row
min_user_def_parm_1 through min_user_def_parm_3
Minimum limits for user-defined parameters, which you can use to include TG characteristics not covered by
previously defined parameters. Each of these parameters has a range of
0–255.
max_effect_cap
Maximum limit for line speed, in bits per second.
max_connect_cost
Maximum limit for cost per connect time.
max_byte_cost
Maximum limit for cost per byte.
max_security
Maximum level of security. Possible values are:
SEC_NONSECURE
Data is transmitted over an unsecured network.
SEC_PUBLIC_SWITCHED_NETWORK
Data is transmitted over a public-switched network.
SEC_UNDERGROUND_CABLE
Data is transmitted over secure underground cable.
SEC_SECURE_CONDUIT
Data is transmitted over a line in a secure conduit that is not guarded.
SEC_GUARDED_CONDUIT
Data is transmitted over a line in a conduit that is protected against physical tapping.
SEC_ENCRYPTED
Data is encrypted before transmission over the line.
SEC_GUARDED_RADIATION
Data is transmitted over a line that is protected against physical and radiation tapping.
SEC_MAXIMUM
Data is transmitted over a network that has maximum security.
max_prop_delay
Maximum limits for propagation delay, which is the time that a signal takes to travel the length of the link,
in microseconds.
Possible values are:
PROP_DELAY_MINIMUM
Minimum propagation delay.
PROP_DELAY_LAN
Delay is less than .5 microseconds (typical for a LAN).
PROP_DELAY_TELEPHONE
Delay is in the range .5–50 microseconds (typical delay for a telephone network).
PROP_DELAY_PKT_SWITCHED_NET
Delay is in the range 50–250 microseconds (typical delay for a packet-switched network).
PROP_DELAY_SATELLITE
329