HP-UX SNAplus2 R7 Administration Command Reference

Administration Commands
query_cos_tg_row
cos_name
Specifies the class of service (COS) name.
tg_row_index
Specifies the TG row index (the first row has an index of zero).
min_effect_cap
Minimum limit for line speed, in bits per second.
min_connect_cost
Minimum limit for cost per connect time.
min_byte_cost
Minimum limit for cost per byte.
min_security
Minimum level of security. Possible values are:
SEC_NONSECURE
Data is transmitted over an unsecured network.
SEC_PUBLIC_SWITCHED_NETWORK
Data is transmitted over a public-switched network.
SEC_UNDERGROUND_CABLE
Data is transmitted over secure underground cable.
SEC_SECURE_CONDUIT
Data is transmitted over a line in a secure conduit that is not guarded.
SEC_GUARDED_CONDUIT
Data is transmitted over a line in a conduit that is protected against physical tapping.
SEC_ENCRYPTED
Data is encrypted before transmission over the line.
SEC_GUARDED_RADIATION
Data is transmitted over a line that is protected against physical and radiation tapping.
min_prop_delay
Minimum limits for propagation delay, which is the time that a signal takes to travel the length of the link,
in microseconds. Possible values are:
PROP_DELAY_LAN
Delay less than .5 microseconds (typical for a LAN) or minimum propagation delay. This value is
returned if the
define_cos specified either PROP_DELAY_MINIMUM or PROP_DELAY_LAN.
PROP_DELAY_TELEPHONE
Delay is in the range .5–50 microseconds (typical delay for a telephone network).
PROP_DELAY_PKT_SWITCHED_NET
Delay is in the range 50–250 microseconds (typical delay for a packet-switched network).
PROP_DELAY_SATELLITE
Delay is greater than 250 microseconds (typical delay for a satellite link).
PROP_DELAY_MAXIMUM
Maximum propagation delay.
328