HP-UX SNAplus2 R7 Administration Command Reference

Administration Commands
query_central_logging
2.106.1 Supplied Parameters
[query_central_logger]
No parameters are supplied for this command.
2.106.2 Returned Parameters
Parameter name Type Length
node_name character 128
If the command executes successfully, SNAplus2 returns the following parameter:
node_name
The name of the node defined as the central logger. You can issue query_central_logging to this
node to determine whether central logging is currently enabled.
2.106.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a
secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
No parameter errors occur for this command.
State Check
If the command does not execute because of a state error, SNAplus2 returns the following parameters:
primary_rc
STATE_CHECK
secondary_rc
NO_CENTRAL_LOG
No master server is currently active.
Other Conditions
Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary
return codes that are common to all commands.
2.107 query_central_logging
The query_central_logging command returns information about whether SNAplus2 log messages are sent
to a central file from all servers, or to a separate file on each server. For more information about log files, see
Section 2.189, set_log_file.
This command must be issued without specifying a node name.
2.107.1 Supplied Parameters
[query_central_logging]
313