HP-UX SNAplus2 R7 Administration Command Reference

Administration Commands
query_3270_diag
PATH_SWITCH_DISABLED
secondary_rc
(No secondary return code is returned.)
Path Switch Failure
If the command does not execute because the path switch attempt fails, SNAplus2 returns the following parameter:
primary_rc
UNSUCCESSFUL
secondary_rc
(No secondary return code is returned.)
Function Not Supported
If the command does not execute because the node’s configuration does not support it, SNAplus2 returns the
following parameters:
primary_rc
FUNCTION_NOT_SUPPORTED
This node is not defined to support High Performance Routing (HPR).
secondary_rc
(This parameter is not used.)
Other Conditions
Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary
return codes that are common to all commands.
2.98 query_3270_diag
The query_3270_diag command returns information about the 3270 diagnostics parameters for the SNAplus2
system. The command always returns information about the parameters used to record and display response-time
data. Depending on the options used, it can also return data about one or more 3270 user alerts that users can send
to the host NetView program.
This command is not associated with a particular node because 3270 diagnostics parameters are defined as domain
resources.
If 3270 diagnostics parameters have not been defined, the command returns the default parameters that SNAplus2
uses for response-time data; no alert definitions are returned.
2.98.1 Supplied Parameters
Parameter name Type Length Default
[query_3270_diag]
num_entries decimal 0
list_options constant LIST_INCLUSIVE
alert_number decimal 1
Supplied parameters are:
num_entries
294