HP-UX SNAplus2 R7 Administration Command Reference

Administration Commands
delete_lu_lu_password
The base_name parameter contained a character that was not valid.
State Check
If the command does not execute because of a state error, SNAplus2 returns the following parameters:
primary_rc
STATE_CHECK
secondary_rc
INVALID_LU_NAME
There were no LUs defined with names in the specified range.
Other Conditions
Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary
return codes that are common to all commands.
2.81 delete_lu_lu_password
The delete_lu_lu_password command deletes an LU-LU password associated with a local LU. LU-LU
passwords are deleted automatically when the local LU is deleted; use this command only if you need to delete the
password but leave the LU configured.
2.81.1 Supplied Parameters
Parameter name Type Length Default
[delete_lu_lu_password]
lu_name character 8 (null string)
lu_alias character 8 (null string)
fqplu_name character 17
Supplied parameters are:
lu_name
LU name of the local LU. This name is a type-A character string. To indicate that the LU is defined by its
LU alias instead of its LU name, do not specify this parameter.
lu_alias
LU alias of the local LU. This is a character string using any locally displayable characters. This parameter
is used only if lu_name is not specified.
To indicate the LU associated with the CP (the default LU), do not specify either lu_name or lu_alias.
fqplu_name
Fully qualified name of the partner LU. Specify 3–17 type-A characters consisting of a 1–8 character network
name, followed by a period, followed by a 1–8 character partner LU name.
2.81.2 Returned Parameters
No parameters are returned by SNAplus2 when this command executes successfully.
272