HP-UX SNAplus2 R7 Administration Command Reference

Administration Commands
delete_dspu_template
template_name character 8
{dslu_template}
min_nau decimal
max_nau decimal
host_lu character 8
allow_timeout constant NO
delayed_logon constant NO
Supplied parameters are:
template_name
Name of the DSPU template to be deleted, or the DSPU template containing the DSLU templates to be
deleted. Specify 1–8 locally displayable characters.
To delete the entire DSPU template, do not specify any
dslu_template subrecords. To delete one or more DSLU
templates but leave the DSPU template configured, specify a
dslu_template subrecord for each DSLU template to be
deleted. The subrecord
dslu_template
contains the following parameters:
min_nau
Minimum NAU address in the range of DSLU templates to be deleted. Specify a value in the range
1–255.
max_nau
Maximum NAU address in the range of DSLU templates to be deleted. Specify a value in the range 1–255.
allow_timeout
Specifies whether SNAplus2 is allowed to timeout host LUs used by this downstream LU if the session is
left inactive for the timeout period specified on the host LU definition. Possible values are:
YES
SNAplus2 is allowed to timeout host LUs used by this downstream LU.
NO
SNAplus2 is not allowed to timeout host LUs used by this downstream LU.
delayed_logon
Specifies whether SNAplus2 delays connecting the downstream LU to the host LU until the first data is
received from the downstream LU. Instead, a simulated logon screen is sent to the downstream LU. Possible
values are:
YES
SNAplus2 delays connecting the downstream LU to the host LU until the first data is received from the
downstream LU.
NO
SNAplus2 does not delay connecting the downstream LU to the host LU until the first data is received
from the downstream LU.
host_lu
Name of the host LU or host LU pool onto which all the downstream LUs within the range will be mapped.
2.72.2 Returned Parameters
If the command executes successfully, the following parameter is returned:
260