HP-UX SNAplus2 R7 Administration Command Reference

Administration Commands
define_tr_port, define_ethernet_port, define_fddi_port
act_xid_exchange_limit
Activation XID exchange limit. Specify a value in the range 0–65,535.
nonact_xid_exchange_limit
Nonactivation XID exchange limit. Specify a value in the range 0–65,535.
ls_xmit_rcv_cap
Specifies the link station transmit/receive capability. Possible values are:
LS_TWS
Two-way simultaneous
LS_TWA
Two-way alternating
max_ifrm_rcvd
Maximum number of I-frames that can be received by the local link stations before an acknowledgment is
sent. Specify in the range 1–127.
target_pacing_count
Indicates the desired pacing window size. Specify a value in the range 1–32,767.
max_send_btu_size
Maximum BTU size that can be sent from this port. This value is used to negotiate the maximum BTU size
that a pair of link stations can use to communicate with each other. The value includes the length of the TH
and RH (total 9 bytes), as well as the RU. Specify a value in the range 265–65535.
lsap_address
Local SAP address of the port. Specify a multiple of 0x04 in the range 0x04–0xEC. The value must be
specified as two hexadecimal digits preceded by 0x.
implicit_cp_cp_sess_support
Specifies whether CP-CP sessions are allowed for implicit link stations using this port. Possible values are:
YES
CP-CP sessions are allowed for implicit link stations.
NO
CP-CP sessions are not allowed for implicit link stations.
implicit_limited_resource
Specifies whether implicit link stations off this port should be defined as limited resources. Possible values
are:
NO
Implicit links are not limited resources, and are not automatically deactivated.
NO_SESSIONS
Implicit links are limited resources, and are automatically deactivated when no active sessions are using
them.
INACTIVITY
Implicit links are limited resources, and are automatically deactivated when no active sessions are using
them or when no data has flowed for the time period specified by the implicit_deact_timer parameter.
243