HP-UX SNAplus2 R7 Administration Command Reference

Administration Commands
define_qllc_ls
You cannot use this command to modify the port used by an existing LS; the port_name specified on the command
must match the previous definition of the LS. The LS can be modified only if it is not started.
2.45.1 Supplied Parameters
Parameter name Type Length Default
[define_qllc_ls]
ls_name character 8
description character 31 (null string)
port_name character 8
adj_cp_name character 17 (null string)
adj_cp_type constant LEARN_NODE
address character 15 (null string)
auto_act_supp constant NO
tg_number decimal 0
limited_resource constant NO
solicit_sscp_sessions constant NO
pu_name character 8 (null string)
disable_remote_act constant NO
dspu_services constant NONE
dspu_name character 8 (null string)
dlus_name character 17 (null string)
bkup_dlus_name character 17 (null string)
hpr_supported constant NO
link_deact_timer decimal 30
default_nn_server constant NO
ls_attributes constant SNA
adj_node_id hex array 4 (0x0)
local_node_id hex array 4 (0x0)
cp_cp_sess_support constant YES
use_default_tg_chars constant YES
effect_cap decimal 9600
connect_cost decimal 0
byte_cost decimal 0
security constant SEC_PUBLIC_SWITCHED_NETWORK
prop_delay constant PROP_DELAY_PKT_SWITCHED_NET
user_def_parm_1 decimal 0
user_def_parm_2 decimal 0
user_def_parm_3 decimal 0
target_pacing_count decimal 7
max_ifrm_rcvd decimal 0
dlus_retry_timeout decimal 0
dlus_retry_limit decimal 0
branch_link_type constant UPLINK (used only
if this node is BrNN)
adj_brnn_cp_support constant ALLOWED (used only
if this node is BrNN)
max_send_btu_size decimal 265
ls_role constant USE_PORT_DEFAULTS
initially_active constant NO
react_timer decimal 30
react_timer_retry decimal 0
restart_on_normal_deact constant NO
vc_type constant SVC
loc_packet constant DEFAULT
rem_packet constant DEFAULT
req_rev_charge constant NO
loc_wsize decimal 0
rem_wsize decimal 0
151